Version 1.0.0

• Official Release

Version 1.0.1

• Reduced GPU usage

Version 1.0.2

• Fixed wrong image issue in Video Renderer
• Minor changes and fixes

Version 1.1.0

• Added support for DXVA decode
• Reduced GPU usage
• Reduced processing time
• Now can use BlueskyFRC even if Radeon GPU is not default adapter
• Minor changes and fixes

Version 1.2.0

• Added support for Variable Frame Rate
• Minor changes and fixes

Version 1.3.0

• Added Zero-Copy Mode and improved performance
• Minor changes and fixes

Version 1.3.1

• Fixed AppCrash issue when using the PotPlayer with internal DXVA decoder
• Minor changes and fixes

Version 1.3.2

• Fixed coud not use BlueskyFRC when playing specific file

Version 1.3.3

• Fixed 30p->60p conversion issue in version 1.3.2

Version 2.0.0

• Now can use Mode2 24p Conversion regardless of Fluid Motion setting on Radeon Settings or Catalyst Control Center
• Improved rate detection processing
• Fixed disturbance of the image after seeking when running Zero-Copy Mode
• Now disable Zero-Copy Mode when player connect to renderer besides EVR
• Added support to select GPU on BlueskyFRC Utility
• Added "Skip rate check when connected" option on BlueskyFRC Utility
• Minor changes and fixes

Version 2.0.1

• Changed device check timing in DirectShow filter

Version 2.1.0

• Changed AFM Mode setting
• Added "Enable AFM support" setting for the Catalyst Control Center and the Radeon Settings
• Now the display driver does not apply video filter
• Improved performance and behavior
• Rolled back behavior of Zero-Copy Mode
• Minor changes and fixes

Version 2.1.1

• Minor changes and fixes

Version 2.2.0

• Improved performance
• Improved performance when running Zero-Copy Mode
• Added "Enable Video Quality Filter" setting
• Minor changes and fixes

Version 2.2.1

• Minor change

Version 2.3.0

• Improved rate detection processing
• Resolved frame interpolation processing or video quality processing not performed under specific conditions on AMD Radeon GPU
• Resolved deinterlace issue in madVR
• Fixed not respons issue when enable Direct3D fullscreen on palyer and enable Zero-Copy Mode on BlueskyFRCUtil
• Minor changes and fixes

Version 2.4.0

• Added support to check Vp status
• Fixed GPU select setting issue
• Fixed an issue that player does not use BlueskyFRC filter under specific conditions on AMD Radeon GPU
• Fixed app crash issue under specific conditions when running DXVA decode
• Minor changes and fixes

Version 2.4.1

• Adjusted the number of input buffer
• Minor changes

Version 2.4.2

• Fixed GPU name was not displayed issue on Status tab
• Minor changes

Version 2.5.0

• Added decode function using external decoder
• Fixed issue when playing 10bit HEVC file
• Minor changes and fixes

Version 2.5.1

• Disabled DXVA decode when playing 10bit HEVC file
• Minor change

Version 2.5.2

• Enabled DXVA decode when playing 10bit HEVC file
• Fixed app crash issue under specific conditions on Windows7
• Minor change

Version 2.5.3

• Fixed ErrorCode2 under specific conditions
• Fixed player does not use BlueskyFRC filter when enabling decode function

Version 2.5.4

• Added "Copy" button on the "Status" tab
• Minor changes

Version 2.5.5

• Minor change

Version 2.6.0

• Minor chang

Version 2.6.1

• Fixed setting file loading issue under specific conditions

Version 2.7.0

• Improved rate detection processing
• Fixed image corruption issue when enabling DXVA decode

Version 2.7.1

• Fixed incorrect frame issue when running Zero-Copy Mode
• Fixed screen rotation issue when using PotPlayer
• Minor changes and fixes

Version 2.8.0

• Improved rate detection and rate change processing
• Improved behavior of video processor
• Fixed app crash and stop response issues under specific conditions when running DXVA decode
• Changed system requirements
• Minor changes and fixes

Version 2.8.1

• Fixed DXVA decoding was not activated on 10bit HEVC content playback under specific conditions
• Minor changes and fixes

Version 2.8.2

• Fixed issue that Activation/Deactivation of rate conversion setting did not match GPU support status when changed AFM mode on BlueskyFRCUtility
• Minor change

Version 2.8.3

• Fixed could not use BlueskyFRC filter in the Stereoscopic Player

Version 2.8.4

• Fixed rate conversion malfunction issue when changing the AFM Mode

Version 2.9.0

• Resolved frame glitch problem on some AMD GPUs with Crimson ReLive Edition 17.6.1 or newer when disabling Zero-Copy mode
• Resolved interpolated frame was not generated on some AMD GPUs after video processor was reseted
• Fixed playback issue when playing 10bit contents

Version 2.10.0

• Improve processing when changing frame rate
• Fixed application error under specific conditions
• Minor change

Version 2.11.0

• Added support for Adrenalin Edition 18.4.1
• Minor changes and fixes

Version 2.12.0

• Resolved issues when playing 10bit contents with DXVA decode
• Added support for Zero-Copy Mode in madVR
• Minor changes and fixes

Version 2.12.1

• Fixed issue that "Enable support for DXVA decoder" setting was not functioning

Version 2.12.2

• Fixed memory leak issue when using madVR with Zero-Copy Mode
• Minor change and fix

Version 2.12.3

• Fixed memory leak issue after playing 10bit content under specific conditions

Version 2.13.0

• Added support to change detail filter mode (Edge Enhancement/Detail Enhancement/Resolution Enhancement) in Video Quality Filter
• Added support to change noise filter mode (Temporal NR, MoComp Temporal NR) in Video Quality Filter
• Added support to enable Mosquito Noise Reduction, De-contouring and De-blocking in Video Quality Filter
• Added support to change Dynamic Contrast mode (Non-Adaptive/Content Adaptive) in Video Quality Filter
• Added support to change Color filter mode (Color Vibrance/Color Enhancement) in Video Quality Filter
• Changed processing when playing HDR10 contents on Radeon RX 400/500/Vega series
• Changed behavior of Video Quality Filter on Enhanced Video Renderer when enabling Zero-Copy Mode
• Changed BlueskyFRCUtility UI
• Minor changes and fixes

Version 2.13.1

• Fixed incorrect frame issue under specific conditions
• Minor improvements and fixes

Version 2.13.2

• Resolved problem that interpolated frame might not generated when playing 10bit content in Adrenalin 2019 Edition

Version 2.13.3

• Fixed atiumdva.dll/atiumd6a.dll error when playing HDR content on the PotPlayer with Adrenalin 2019 Edition
• Fixed not response issue when playing 10bit content on sub monitor

Version 2.14.0

• Added support to enable AMD Fluid Motion Video on BlueskyFRCUtility
• Added support to enable 30p conversion even when "Video" setting is missing on "Radeon Settings" in hybrid graphics (switchable graphics) system

Version 2.14.1

• Fixed "Enable AFM" setting was gray out under specific conditions

Version 2.14.2

• Changed "Enable AFM" to "Enable AMD Fluid Motion Video" and move it to "GPU" setting
• Minor change

Version 2.15.0

• Resolved color problem when playing 10bit contents with Adrenalin Edition 18.4.1 or newer
• Minor improvements and changes

Version 2.15.1

• Fixed playback issue when playing HDR contents in Version 2.15.0 under specific conditions

Version 2.15.2

• Fixed incorrect frame issue under specific situation when playing 10bit contents
• Fixed player crash issue when enabling decode function using external decoder

Version 2.15.3

• Fixed error on the PotPlayer when enabling decode function using external decoder

Version 2.15.4

• Fixed invalid area was displayed when using MPC-BE and MPC Video Decoder with DXVA decode

Version 2.15.5

• Fixed playback issue when BlueskyFRC was connected to a sepecific filter
• Minor change

Version 2.15.6

• Fixed invalid area might be displayed in madVR

Version 2.15.7

• Improved the frame rate sometimes decreased due to delay in a specific 30p contents

Version 2.15.8

• Minor fix

Version 2.16.0

• Enabled 25p to 60p conversion by frame interpolation and frame drop
• Minor change

Version 2.16.1

• Fixed 25p conversion might not be enabled when "Skip rate check when connecting" setting was unchecked

Version 2.16.2

• Fixed green dot might be displayed on the upper left of the screen
• Minor fixes

Version 2.16.2

• Fixed "Enable AMD Fluid Motion Video" setting was gray out under specific environment
• Removed "De-blocking" option
• Minor fixes

Version 3.0.0

• Added 24p to 72p conversion for 144Hz monitor
• Added 60i to 24p (inverse telecine) to 60p conversion
• Added "Anti Frame Blend Mode" to reduce blend frames
• Added support to select deinterlace mode (Auto, Vector Adaptive, Direction Adaptive)
• Added dithering for color format conversion
• Changed processing when playing HDR contents on Radeon RX 400/500/Vega series
• Changed BlueskyFRC Utility UI
• Minor improvements, fixes and changes

Version 3.1.0

• Enabled 24p to 72p conversion on 72Hz monitor
• Fixed 24p to 72p conversion issue under specific conditions
• Fixed player crash issue when converting frame rate to 24fps using Avisynth in the player on 144Hz monitor
• Fixed GPU selection issue in Version 3.0.0
• Fixed "Eanble AMD Fluid Motion Video" option issue in Version 3.0.0
• Fixed decoding function issue in Version 3.0.0
• Minor changes and fixes

Version 3.1.1

• Fixed issue when playing variable frame rate content

Version 3.1.2

• Now enable AMD Fluid Motion Video without driver reset

Version 3.2.0

• Added "Output Buffers" setting to "Option"
• Fixed playback issue when converting 60i to 60p under specific situations
• Fixed "Enable AMD Fluid Motion Video" setting was gray out under specific environment

Version 3.2.1

• Fixed player crash issue when reaching EndOfStream under specific situations

Version 3.3.0

• Added support to set output rate for 24p/60i input rate
• Minor fixes

Version 3.4.0

• Added "Auto" option to "Output" in "Rate Conversion" setting

Version 3.4.1

• Fixed issue that took a long time to start playing when enabling decode functions under specific situations

Version 3.4.2

• Fixed AMD Fluid Motion Video could not be enbled under specific environment

Version 3.4.3

• Fixed green artifacts might be displayed at the bottom of the screen when convertion 10bit/24p content to 72p

Version 3.4.4

• Fixed player crash issue when playing certain 10bit contents in Version 3.4.3

Version 3.5.0

• Improved setting operation when using Ryzen 2000/3000/4000/5000 Series APU
• Improved setting operation when using a GPU that is not connected to the monitor
• Removed AFM Mode setting
• Minor fix

Version 3.5.1

• Fixed player hung up issue after skeeking when using MPC Video Decoder with DXVA decoding

Version 3.5.2

• Fixed "Rate Conversion" setting was gray out when Radeon RX 5000/6000 series was the default adapter
• Changed .NET Framework 4.6 to 4.8

Version 4.0.0

• Added 25p and 30p to 72p conversion
• Reduced GPU usage when converting 24p and 60i to 72p
• Improved smoothness when converting 25p to 60p
• Added support for Zero-Copy Mode in MPC Video Renderer
• Changed behavior of Video Quality Filter
• Minor improvements and changes

Back